# Text entries for the Prune application
# English entries as default - others can be added

# Menu entries
menu.file=File
menu.file.open=Open
menu.file.addphotos=Add photos
menu.file.save=Save
menu.file.exportkml=Export KML
menu.file.exportgpx=Export GPX
menu.file.exportpov=Export POV
menu.file.exit=Exit
menu.edit=Edit
menu.edit.undo=Undo
menu.edit.clearundo=Clear undo list
menu.edit.editpoint=Edit point
menu.edit.editwaypointname=Edit waypoint name
menu.edit.deletepoint=Delete point
menu.edit.deleterange=Delete range
menu.edit.deleteduplicates=Delete duplicates
menu.edit.compress=Compress track
menu.edit.interpolate=Interpolate
menu.edit.reverse=Reverse range
menu.edit.rearrange=Rearrange waypoints
menu.edit.rearrange.start=All to start of file
menu.edit.rearrange.end=All to end of file
menu.edit.rearrange.nearest=Each to nearest track point
menu.select=Select
menu.select.all=Select all
menu.select.none=Select none
menu.select.start=Set range start
menu.select.end=Set range end
menu.photo=Photo
menu.photo.saveexif=Save to Exif
menu.photo.connect=Connect to point
menu.photo.disconnect=Disconnect from point
menu.photo.correlate=Correlate all photos
menu.photo.delete=Remove photo
menu.3d=Three-D
menu.3d.show3d=Show in Three-D
menu.help=Help
menu.help.about=About Prune
# Popup menu for map
menu.map.zoomin=Zoom in
menu.map.zoomout=Zoom out
menu.map.zoomfull=Zoom to full scale
menu.map.connect=Connect track points
menu.map.autopan=Autopan

# Dialogs
dialog.exit.confirm.title=Exit Prune
dialog.exit.confirm.text=Your data is not saved. Are you sure you want to exit?
dialog.openappend.title=Append to existing data
dialog.openappend.text=Append this data to the data already loaded?
dialog.deletepoint.title=Delete Point
dialog.deletepoint.deletephoto=Delete photo attached to this point?
dialog.deletephoto.title=Delete Photo
dialog.deletephoto.deletepoint=Delete point attached to this photo?
dialog.deleteduplicates.title=Delete Duplicates
dialog.deleteduplicates.single.text=duplicate was deleted
dialog.deleteduplicates.multi.text=duplicates were deleted
dialog.deleteduplicates.nonefound=No duplicates found
dialog.compresstrack.title=Compress Track
dialog.compresstrack.parameter.text=Parameter for compression (lower number = more compression)
dialog.compresstrack.text=Track compressed
dialog.compresstrack.single.text=data point was removed
dialog.compresstrack.multi.text=data points were removed
dialog.compresstrack.nonefound=No data points could be removed
dialog.openoptions.title=Open options
dialog.openoptions.filesnippet=Extract of file
dialog.load.table.field=Field
dialog.load.table.datatype=Data Type
dialog.load.table.description=Description
dialog.delimiter.label=Field delimiter
dialog.delimiter.comma=Comma ,
dialog.delimiter.tab=Tab
dialog.delimiter.space=Space
dialog.delimiter.semicolon=Semicolon ;
dialog.delimiter.other=Other
dialog.openoptions.deliminfo.records=records, with 
dialog.openoptions.deliminfo.fields=fields
dialog.openoptions.deliminfo.norecords=No records
dialog.openoptions.tabledesc=Extract of file
dialog.openoptions.altitudeunits=Altitude units
dialog.jpegload.subdirectories=Include subdirectories
dialog.jpegload.loadjpegswithoutcoords=Include photos without coordinates
dialog.jpegload.progress.title=Loading photos
dialog.jpegload.progress=Please wait while the photos are searched
dialog.jpegload.title=Loaded photos
dialog.jpegload.photoadded=photo was added
dialog.jpegload.photosadded=photos were added
dialog.saveoptions.title=Save file
dialog.save.fieldstosave=Fields to save
dialog.save.table.field=Field
dialog.save.table.hasdata=Has data
dialog.save.table.save=Save
dialog.save.headerrow=Output header row
dialog.save.coordinateunits=Coordinate units
dialog.save.altitudeunits=Altitude units
dialog.save.timestampformat=Timestamp format
dialog.save.oktitle=File saved
dialog.save.ok1=Successfully saved
dialog.save.ok2=points to file
dialog.save.overwrite.title=File already exists
dialog.save.overwrite.text=This file already exists. Are you sure you want to overwrite the file?
dialog.exportkml.title=Export KML
dialog.exportkml.text=Title for the data
dialog.exportkml.altitude=Include altitudes (for aviation)
dialog.exportkml.kmz=Compress to make kmz file
dialog.exportkml.exportimages=Export image thumbnails to kmz
dialog.exportkml.filetype=KML, KMZ files
dialog.exportgpx.title=Export GPX
dialog.exportgpx.name=Name
dialog.exportgpx.desc=Description
dialog.exportgpx.filetype=GPX files
dialog.exportpov.title=Export POV
dialog.exportpov.text=Please enter the parameters for the POV export
dialog.exportpov.font=Font
dialog.exportpov.camerax=Camera X
dialog.exportpov.cameray=Camera Y
dialog.exportpov.cameraz=Camera Z
dialog.exportpov.filetype=POV files
dialog.exportpov.warningtracksize=This track has a large number of points, which Java3D might not be able to display.\nAre you sure you want to continue?
dialog.confirmreversetrack.title=Confirm reversal
dialog.confirmreversetrack.text=This track contains timestamp information, which will be out of sequence after a reversal.\nAre you sure you want to reverse this section?
dialog.interpolate.title=Interpolate points
dialog.interpolate.parameter.text=Number of points to insert between selected points
dialog.undo.title=Undo action(s)
dialog.undo.pretext=Please select the action(s) to undo
dialog.confirmundo.title=Operation(s) undone
dialog.confirmundo.single.text=operation undone.
dialog.confirmundo.multiple.text=operations undone.
dialog.undo.none.title=Cannot undo
dialog.undo.none.text=No operations to undo!
dialog.clearundo.title=Clear undo list
dialog.clearundo.text=Are you sure you want to clear the undo list?\nAll undo information will be lost!
dialog.pointedit.title=Edit point
dialog.pointedit.text=Select each field to edit and use the 'Edit' button to change the value
dialog.pointedit.table.field=Field
dialog.pointedit.table.value=Value
dialog.pointedit.table.changed=Changed
dialog.pointedit.changevalue.text=Enter the new value for this field
dialog.pointedit.changevalue.title=Edit field
dialog.pointnameedit.title=Edit waypoint name
dialog.pointnameedit.name=Waypoint name
dialog.pointnameedit.uppercase=UPPER case
dialog.pointnameedit.lowercase=lower case
dialog.pointnameedit.sentencecase=Sentence case
dialog.saveexif.title=Save Exif
dialog.saveexif.intro=Select the photos to save using the checkboxes
dialog.saveexif.nothingtosave=Coordinate data is unchanged, nothing to save
dialog.saveexif.noexiftool=No exiftool program could be found. Continue?
dialog.saveexif.table.photoname=Photo name
dialog.saveexif.table.status=Status
dialog.saveexif.table.save=Save
dialog.saveexif.photostatus.connected=Connected
dialog.saveexif.photostatus.disconnected=Disconnected
dialog.saveexif.photostatus.modified=Modified
dialog.saveexif.overwrite=Overwrite files
dialog.saveexif.ok1=Saved
dialog.saveexif.ok2=photo files
dialog.correlate.title=Correlate photos
dialog.correlate.notimestamps=There are no timestamps in the data points, so there is nothing to correlate with the photos.
dialog.correlate.nouncorrelatedphotos=There are no uncorrelated photos.\nAre you sure you want to continue?
dialog.correlate.photoselect.intro=Select one of these correlated photos to use as the time offset
dialog.correlate.photoselect.photoname=Photo name
dialog.correlate.photoselect.timediff=Time difference
dialog.correlate.photoselect.photolater=Photo later
dialog.correlate.options.tip=Tip: By manually correlating at least one photo, the time offset can be calculated for you.
dialog.correlate.options.intro=Select the options for automatic correlation
dialog.correlate.options.offsetpanel=Time offset
dialog.correlate.options.offset=Offset
dialog.correlate.options.offset.hours=hours,
dialog.correlate.options.offset.minutes=minutes and
dialog.correlate.options.offset.seconds=seconds
dialog.correlate.options.photolater=Photo later than point
dialog.correlate.options.pointlater=Point later than photo
dialog.correlate.options.limitspanel=Correlation limits
dialog.correlate.options.notimelimit=No time limit
dialog.correlate.options.timelimit=Time limit
dialog.correlate.options.nodistancelimit=No distance limit
dialog.correlate.options.distancelimit=Distance limit
dialog.correlate.options.correlate=Correlate
dialog.correlate.alloutsiderange=All photos are outside the time range of the track, so none can be correlated.\nTry changing the offset or manually correlating at least one photo.
dialog.correlate.confirmsingle.text=photo was correlated
dialog.correlate.confirmmultiple.text=photos were correlated
dialog.help.help=Please see\n http://activityworkshop.net/software/prune/\nfor more information and user guides.
dialog.about.title=About Prune
dialog.about.version=Version
dialog.about.build=Build
dialog.about.summarytext1=Prune is a program for loading, displaying and editing data from GPS receivers.
dialog.about.summarytext2=It is released under the Gnu GPL for free, open, worldwide use and enhancement.<br>Copying, redistribution and modification are permitted and encouraged<br>according to the conditions in the included <code>license.txt</code> file.
dialog.about.summarytext3=Please see <code style="font-weight:bold">http://activityworkshop.net/</code> for more information and user guides.
dialog.about.translatedby=English text by activityworkshop.
dialog.about.systeminfo=System info
dialog.about.systeminfo.os=Operating System
dialog.about.systeminfo.java=Java Runtime
dialog.about.systeminfo.java3d=Java3d installed
dialog.about.systeminfo.povray=Povray installed
dialog.about.systeminfo.exiftool=Exiftool installed
dialog.about.yes=Yes
dialog.about.no=No
dialog.about.credits=Credits
dialog.about.credits.code=Prune code written by
dialog.about.credits.exifcode=Exif code by
dialog.about.credits.icons=Some icons taken from
dialog.about.credits.translators=Translators
dialog.about.credits.translations=Translations helped by
dialog.about.credits.devtools=Development tools
dialog.about.credits.othertools=Other tools
dialog.about.credits.thanks=Thanks to

# 3d window
dialog.3d.title=Prune Three-d view
dialog.3d.altitudecap=Minimum altitude range
dialog.3dlines.title=Prune gridlines
dialog.3dlines.empty=No gridlines to display!
dialog.3dlines.intro=These are the gridlines for the three-d view

# Buttons
button.ok=OK
button.back=Back
button.next=Next
button.finish=Finish
button.cancel=Cancel
button.overwrite=Overwrite
button.moveup=Move up
button.movedown=Move down
button.showlines=Show lines
button.edit=Edit
button.exit=Exit
button.close=Close
button.continue=Continue
button.yes=Yes
button.no=No
button.yestoall=Yes to all
button.notoall=No to all
button.selectall=Select all
button.selectnone=Select none
button.preview=Preview
button.guessfields=Guess fields

# Display components
display.nodata=No data loaded
display.noaltitudes=Track data does not include altitudes
details.trackdetails=Track details
details.notrack=No track loaded
details.track.points=Points
details.track.file=File
details.track.numfiles=Number of files
details.pointdetails=Point details
details.index.selected=Index
details.index.of=of
details.nopointselection=No point selected
details.photofile=Photo file
details.norangeselection=No range selected
details.rangedetails=Range details
details.range.selected=Selected
details.range.to=to
details.altitude.to=to
details.range.climb=Climb
details.range.descent=Descent
details.coordformat=Coordinate format
details.distanceunits=Distance units
display.range.time.secs=s
display.range.time.mins=m
display.range.time.hours=h
display.range.time.days=d
details.waypointsphotos.waypoints=Waypoints
details.waypointsphotos.photos=Photos
details.photodetails=Photo details
details.nophoto=No photo selected
details.photo.loading=Loading
details.photo.connected=Connected

# Field names
fieldname.latitude=Latitude
fieldname.longitude=Longitude
fieldname.altitude=Altitude
fieldname.timestamp=Timestamp
fieldname.waypointname=Name
fieldname.waypointtype=Type
fieldname.newsegment=Segment
fieldname.custom=Custom
fieldname.prefix=Field
fieldname.distance=Distance
fieldname.duration=Duration

# Measurement units
units.original=Original
units.default=Default
units.metres=Metres
units.metres.short=m
units.feet=Feet
units.feet.short=ft
units.kilometres=Kilometres
units.kilometres.short=km
units.miles=Miles
units.miles.short=mi
units.degminsec=Deg-min-sec
units.degmin=Deg-min
units.deg=Degrees
units.iso8601=ISO 8601

# Cardinals for 3d plots
cardinal.n=N
cardinal.s=S
cardinal.e=E
cardinal.w=W

# Undo operations
undo.load=load data
undo.loadphotos=load photos
undo.editpoint=edit point
undo.deletepoint=delete point
undo.deletephoto=remove photo
undo.deleterange=delete range
undo.compress=compress track
undo.insert=insert points
undo.deleteduplicates=delete duplicates
undo.reverse=reverse range
undo.rearrangewaypoints=rearrange waypoints
undo.connectphoto=connect photo
undo.disconnectphoto=disconnect photo
undo.correlate=correlate photos

# Error messages
error.save.dialogtitle=Error saving data
error.save.nodata=No data to save
error.save.failed=Failed to save the data to file:
error.saveexif.filenotfound=Failed to find photo file
error.saveexif.cannotoverwrite1=Photo file
error.saveexif.cannotoverwrite2=is read-only and can't be overwritten. Write to copy?
error.load.dialogtitle=Error loading data
error.load.noread=Cannot read file
error.load.nopoints=No coordinate information found in the file
error.load.unknownxml=Unrecognised xml format:
error.load.othererror=Error reading file:
error.jpegload.dialogtitle=Error loading photos
error.jpegload.nofilesfound=No files found
error.jpegload.nojpegsfound=No jpeg files found
error.jpegload.noexiffound=No EXIF information found
error.jpegload.nogpsfound=No GPS information found
error.undofailed.title=Undo failed
error.undofailed.text=Failed to undo operation
error.function.noop.title=Function had no effect
error.rearrange.noop=Rearranging waypoints had no effect
error.function.notimplemented=Sorry, this function has not yet been implemented.
error.function.notavailable.title=Function not available
error.function.nojava3d=This function requires the Java3d library,\navailable from Sun.com or Blackdown.org.
error.3d.title=Error in 3d display
error.3d=An error occurred with the 3d display